Home
Hydromix Logo Installation
Suggestions
Suggestions for support beam location:
Basic approximate dimensions:
Ribbon feeding trucks:
Suggestions for dry batching around the Hydromix®:
A simple, effective bypass design:
Add a second cement butterfly valve to the cement weight hopper either directly on the side or inline in a section of tubing so that one valve delivers to the slurry mixer, the other around the mixer either in front or behind.
 
Click for more plant pictures

The following also may be useful in determining optimum installation of a Hydromix® in your plant.
You may browse and view these drawings now
or download a PDF file to your computer
for viewing off-line using Adobe Acrobat Reader.
You may download Adobe Acrobat Reader free here if you do not already have it.
You will also need a program similar to Winzip to unzip (uncompress) the file before viewing.
Views Browse Download



Remoting the Hydromix®in a plant where the trucks load at 90 to aggregate belt.    
Plan view and end view
Side view

Remoting the Hydromix® in a plant where the trucks load in line with the aggregate belt.    
Plan view and end view
Side view

Hydromix® support and maintenance platform    
For a plant where the trucks load in line with the aggregate belt
For a plant where the trucks load at 90° with the aggregate belt

Efficiency of loading based on mixer truck and aggregate belt angles.

Here is a handy form for providing Hydromix® with plant dimensions to try to ascertain clearances with our slurry mixer installed in your plant. For accuracy you should contact us to arrange to use the information from the form along with other dimensions on a drawing of your plant components provided by you. You may find phone numbers here.